Fenix ARE-A4
Product description
The universal four-channel charger Fenix ARE-A4 is designed for both 3.7V / 3.6V Li-ion and NiMH / NiCd batteries. Each charging slot is monitored independently so that batteries of different sizes, capacities and even different materials can be charged at the same time (both Li-ion and NiMH/NiCd can be charged at the same time). It automatically detects the inserted battery type and selects the optimal charging algorithm.
The charger can charge Li-ion batteries type: 26650, 22650, 25500, 21700, 20700, 18650, 17670, 18700, 14650, 18500, 18490, 18350, 17500, 14500, 16340, RCR123, 10440 and NiMH batteries size AAA, AA, C. The 26650, 22650, 25500 and C size batteries will only fit two pieces in the charger, the other sizes listed can be charged up to four pieces. Li-ion 21700 batteries with protective electronics can also be charged in the charger.
Charger parameters Fenix ARE-A4
- Four independently monitored charging channels, CC/CV charging algorithm.
- Charging current 1000 mA for all charging slots.
- The following Li-ion batteries can be recharged in the charger: 26650, 21700, 20700, 18650, 17670, 18500, 18490, 18350, 17500, 14500, 16340, RCR123. High-quality rechargeable pencil and micro-chargeable batteries can also be charged.
- Four independent charging channels, automatic recognition of the type of battery being charged.
- Protection against short circuit and reverse insertion of batteries.
- The LCD display shows the charging progress, charging time, charging current, voltage and the type of battery being charged.
- Efficient heat dissipation from the charging electronics.
- Dimensions 149.5 x 104 x 40.5 millimetres.
- Weight of the charger 265 grams.
- Supported charger supply voltage 100 - 240 VAC, 12 - 24 VDC.
- Included in the package is a charger and power cord.
Using the charger Fenix ARE-A4
Plug the charger into a socket. The display will light up. When the batteries are inserted, the display will show the battery type and charging status. The button next to each charging channel is used to switch the displayed information in the following order: voltage - charging current - charging time. By long holding the button the display can be switched off and by short holding the button the display can be switched on again and the current battery voltage will be displayed again.
Notice
- Do not charge Li-ion cells that have gone through an over-discharge condition (below 2V).
- Do not insert batteries into the charger in reverse (reverse polarity).
- When using the charger, please observe the safety principles.
- We recommend using high-quality protected Li-ion batteries.
- It is not designed for charging LiFePO4 batteries.
Warranty
Legal two-year warranty.
Share your opinion with others
Add reply to comment: