Camp Turbohand Pro - right

A hand-held blocker Camp Turbohand Pro, which makes it easier to climb the rope. It uses cutting-edge technology and an innovative design that makes the ascent safer, faster and moreover rope-friendly. It uses a patented spinner that not only helps to move the rope more smoothly, but also reduces friction and therefore the risk of damaging the rope. The ergonomic rubberized handle extends to the top of the blocker, making it very efficient to use your other hand to climb up. The CAMP Turbohand PRO is in a parallel position with the rope when ascending, thus guaranteeing the best and most efficient ascent. Three large eyelets, two on the bottom and one on the top of the blocker, are used for optimal organisation of accessories. The Turbohand PRO is available in both left and right hand versions and is suitable for ropes from 8 mm to 13 mm. The robust body is made of 3.5 mm thick aluminium alloy. The toothed cam has a special anti-wear finish and is equipped with holes to help prevent the accumulation of dirt. The opening system is protected against accidental opening from both sides. The presence of the bell also allows the Turbohand Pro to be used as a locking pulley for loads up to 50 kg. WARNING: This configuration does not allow the use of a blocking agent for pulling or securing persons. A steel Turbohand Guide is added to the bottom of the blocker in this configuration for better rope stability on long ascents (easily removable).

• Patented bell system
• Thanks to the roller shutter, it can be used as a self-locking pulley up to a max. load of 50 kg (however, it must not be used for pulling people!)
• Roller for better guidance and rope saving
• Toothed cam with holes for dirt removal
• Ergonomic rubberised handle
• Adapted for second-hand assistance
• 3 large holes for carabiners
• Turbohand Guide included
• Robust body made of 3.5 mm thick aluminium alloy

Use: Rope access, arboriculture, professional rescue
Weight: 198 g
Supported rope diameter: 8-13 mm

EN 12841/B for semi-statics with a diameter of 10-13 mm
EN 567 for semi-statics with a diameter of 8-13 mm