Colltex Todi Crystal - 110 mm
View Full-Size Image
Product description
Ski mountaineering belts Colltex Todi Crystal - 110 mm is a new generation of an excellent universal belt, if you have steep ascents without the possibility of slipping (or if you are pulling a heavier backpack) and you are planning to put on multiple belts during the tour. Very good slip, very good climbability and quite good durability. It has very good properties at temperatures around 0°C on more or less all types of snow.
As the temperature decreases, the synthetic gradually solidifies and the belt loses slip. It is suitable for spring firns where its durability is better than 100% Mohair. If the snow then softens thanks to the spring sun, the slip corresponds to 100% Mohair. On the strips you will find the standard Hotmelt adhesive - for packaging we recommend using a mesh between the adhesive surfaces. It requires more difficult handling, but rewards with a more secure bond - even when other adhesives no longer hold. In case of a problem, it is easier to activate the adhesive in the heat = under the jacket. Belt length: 177 cm = for skis up to 190 cm, Mounting: front - HEXAGON is already attached, (the width of the front is suitable for most skis), end: HEXAGON set must be attached according to the length of the ski.
Features:
- suitable for multiple sticking during a hike
- hotmelt adhesive is relatively easy to refurbish using glue in a tube and adhesive on the transfer film
- we recommend the use of impregnation and wax lubrication
- suitable for all types of skis
- hEXAGON system
- material: 65% mohair / 35% synthetic, double braided fibre This material is characterised by very good slip, very good climbability and relatively good durability
- the eyelet in the front fixes the belt well on toes of different shapes and widths
- buckle on the strap to adjust the corresponding belt preload and secure at the end of the ski
- waist length: 177 cm
Parameters
Features:
- suitable for multiple sticking during a hike
- hotmelt adhesive is relatively easy to refurbish using glue in a tube and adhesive on the transfer film
- we recommend the use of impregnation and wax lubrication
- suitable for all types of skis
- hEXAGON system
- material: 65% mohair / 35% synthetic, double braided fibre This material is characterised by very good slip, very good climbability and relatively good durability
- the eyelet in the front fixes the belt well on toes of different shapes and widths
- buckle on the strap to adjust the corresponding belt preload and secure at the end of the ski
- waist length: 177 cm
Share your opinion with others
Add reply to comment: