Fenix E09R

Product description

Despite its minimal size and light weight of 45 grams, the Fenix E09R flashlight offers a high luminous flux of up to 600 lumens (ANSI) in BURST mode. The light source is the powerful LED Luminus SST-20, which can reach a distance of 124 metres. It has five light modes, with the lowest one lasting 70 hours continuously. It is powered by a built-in 800 mAh Li-pol battery that charges via a modern USB-C connector directly in the flashlight. Of course, the high quality of design, durability and waterproofness according to IP68 standard. The lamp is predestined to serve as a small yet powerful lighting tool for every day. Pinned on your keys, in your pocket, handbag or backpack, it certainly won't take up much space. All luminaire parameters (luminous flux, battery run time, watertightness, range, and shock resistance) determined in accordance with ANSI/NEMA FL 1-2009.

Features:
- Luminus SST-20 powerful LED with 50 000 hours lifetime is used
- Five power modes: BURST 600 lumens (while holding the button) -> 300 lumens (1.5 hours) -> 100 lumens (4 hours) -> 25 lumens (16 hours) -> 3 lumens (70 hours)
- Powered by built-in Li-pol battery with 800 mAh capacity
- Charging via USB-C connector
- Charging time for a fully discharged battery is approx. 1 hour
- Protection against overheating
- The lamp has a memory and always switches on in the last set mode (not valid for BURST mode)
- Dimensions 7.9 cm (length) x 1.93 cm (head) x 1.84 cm (body)
- Weight 45 grams
- Light cone with a range of 124 metres (3970 cd)
- Made of aerospace hardened aluminium. Durable surface - Type III hard anodized
- Shockproof against falls from a height of 1 metre
- Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes)
- Includes metal ring for hanging on keys, spare o-ring, USB-C cable

Application:
The lamp is switched on or off by holding the button for 0.5 seconds. Further short presses cycle through the light modes 3 - 25 - 100 - 300 lumens. To activate the 600 lumens BURST mode, hold the button for more than 1.2 seconds. When the button is released, the luminaire switches to the lowest light mode.

The control button can be locked to prevent spontaneous switching on, e.g. When transporting in luggage. Press the control button twice quickly (within 0.5 seconds). The lamp flashes twice in the lowest light mode to indicate a lockout. To unlock, press the button again twice quickly, the lamp flashes twice again and it is unlocked.

Overheating protection - due to the miniature size of the luminaire and the high output in the highest modes, the luminaire will automatically reduce brightness as soon as it exceeds 60°C. Once the temperature is lowered, the highest modes can be reactivated.

The lamp has a memory and will always switch on in the last set mode (not valid for BURST mode).

charging:
Unscrew the waterproof nut that covers the USB-C connector. Then plug the USB-C charging cable into the USB connector of your computer, USB mains adapter or car. During charging, the indicator LED on the flashlight glows red, after a full charge it glows green. The standard full charge time is 1 hour.

Warning:
Do not disassemble the sealed parts yourself, this will violate the warranty. If the lamp flashes or does not light up, it may be for one of the following reasons: the battery is dead, charge it

Parameters

Features:
- Luminus SST-20 powerful LED with 50 000 hours lifetime is used
- Five power modes: BURST 600 lumens (while holding the button) -> 300 lumens (1.5 hours) -> 100 lumens (4 hours) -> 25 lumens (16 hours) -> 3 lumens (70 hours)
- Powered by built-in Li-pol battery with 800 mAh capacity
- Charging via USB-C connector
- Charging time for a fully discharged battery is approx. 1 hour
- Protection against overheating
- The lamp has a memory and always switches on in the last set mode (not valid for BURST mode)
- Dimensions 7.9 cm (length) x 1.93 cm (head) x 1.84 cm (body)
- Weight 45 grams
- Light cone with a range of 124 metres (3970 cd)
- Made of aerospace hardened aluminium. Durable surface - Type III hard anodized
- Shockproof against falls from a height of 1 metre
- Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes)
- Includes metal ring for hanging on keys, spare o-ring, USB-C cable

Video

features:
- Luminus SST-20 powerful LED with 50 000 hours lifetime is used
- Five power modes: BURST 600 lumens (while holding the button) -> 300 lumens (1.5 hours) -> 100 lumens (4 hours) -> 25 lumens (16 hours) -> 3 lumens (70 hours)
- Powered by built-in Li-pol battery with 800 mAh capacity
- Charging via USB-C connector
- Charging time for a fully discharged battery is approx. 1 hour
- Protection against overheating
- The lamp has a memory and always switches on in the last set mode (not valid for BURST mode)
- Dimensions 7.9 cm (length) x 1.93 cm (head) x 1.84 cm (body)
- Weight 45 grams
- Light cone with a range of 124 metres (3970 cd)
- Made of aerospace hardened aluminium. Durable surface - Type III hard anodized
- Shockproof against falls from a height of 1 metre
- Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes)
- Includes metal ring for hanging on keys, spare o-ring, USB-C cable

usage:
The lamp is switched on or off by holding the button for 0.5 seconds. Further short presses cycle through the light modes 3 - 25 - 100 - 300 lumens. To activate the 600 lumens BURST mode, hold the button for more than 1.2 seconds. When the button is released, the luminaire switches to the lowest light mode.

The control button can be locked to prevent spontaneous switching on, e.g. When transporting in luggage. Press the control button twice quickly (within 0.5 seconds). The lamp flashes twice in the lowest light mode to indicate a lockout. To unlock, press the button again twice quickly, the lamp flashes twice again and it is unlocked.

Overheating protection - due to the miniature size of the luminaire and the high output in the highest modes, the luminaire will automatically reduce brightness as soon as it exceeds 60°C. Once the temperature is lowered, the highest modes can be reactivated.

The lamp has a memory and will always switch on in the last set mode (not valid for BURST mode).

charging:
Unscrew the waterproof nut that covers the USB-C connector. Then plug the USB-C charging cable into the USB connector of your computer, USB mains adapter or car. During charging, the indicator LED on the flashlight glows red, after a full charge it glows green. The standard full charge time is 1 hour.

Warning:
Do not disassemble the sealed parts yourself, this will violate the warranty. If the lamp flashes or does not light up, it may be for one of the following reasons: the battery is dead, charge it

Question on product

Bargain packages