Fenix WT25R

Product description

Fenix The WT25R is a universal rechargeable work light with a unique articulating design with a tilting reflector that houses a Cree XP-L HI LED with up to 1000 lumens and a range of up to 220 meters (ANSI). The head tilts to 105 degrees for maximum versatility. The Fenix WT25R flashlight also features a sturdy steel clip for easy carrying on a belt or work clothes, as well as a magnetic end cap that makes it easy to attach the light to anything iron. Its variability makes the lantern particularly useful for work use, camping, outdoor activities and many other activities.

The flashlight is powered by a Lithium-ion 18650 battery with a capacity of 3400 mAh, which is included in the package and recharged by a USB cable with a magnetic connector directly in the flashlight. Fenix The WT25R has six levels of illumination, including strobe and SOS signal, allowing users to choose a suitable compromise between illumination intensity and operating time. Despite all its functionality, the flashlight retains its minimal size and low weight of 137 grams including the battery.

All luminaire parameters (luminous flux, battery life, waterproofness, range, and impact resistance) are measured in accordance with ANSI/NEMA FL 1-2009.

Parameters of working LED luminaire Fenix WT25R

• It uses powerful Cree XP-L HI LED with a lifetime of 50000 hours of illumination.
• Six power modes:
  • Permanent light modes: 1000 lumens ( 3.66 hours) -> 400 lumens (4.83 hours) -> 150 lumens (11 hours) -> 50 lumens (29 hours).
  • Flash modes: strobe (1000 lumens) -> SOS signal (50 lumens).
• Digitally controlled for constant brightness, electronics remembers the last mode set.
• It uses a single Lithium-ion battery Fenix 18650 with a capacity of 3400 mAh.
• Indication of the battery charge status.
• Charging via magnetic connector on the lamp.
• Textured reflector for light cone with a range of 220 metres (11905 cd).
• Made of hardened aircraft aluminium and impact resistant plastic.
• Metal parts treated with hard anodization type HA-III.
• Dimensions 13,53 cm (length) x 2,94 cm (width) x 2,41 cm (height).
• Weight 137 grams (including battery).
• Electronics with protection against reverse battery insertion.
• Shock-resistant to falls from a height of 1 meter.
• Waterproof to IP66 standard.
• Magnetic end - the lamp can be attached to anything iron.
• Tempered ultra clear glass lens with anti-reflective surface.
• Able to stand independently on a flat spot, the head can be tilted in a range of 105° in several steps.
• Includes flashlight with rechargeable battery Fenix 18650 3400 mAh, USB cable with magnetic end, wrist lanyard, spare o-ring.
• A USB mains adapter and a USB car adapter can also be supplied with the lamp.

Using the LED luminaire Fenix WT25R

The torch is switched on and off by holding the button for 0.5 seconds and once on, the light modes are switched by briefly pressing it. To switch to strobe, hold the button for 1.2 seconds, another short press of the button will then turn on the SOS signal. The luminaire remembers the last selected lighting mode (except for flash modes).

The control button can be locked to prevent it from switching on by itself, e.g. when transporting in luggage - press the control button twice quickly (within 0.5 seconds), the lamp will then flash twice to signal locking. To unlock, press the button twice quickly again.

Overheating protection: due to the lamp's high output of 1000 lumens, it experiences a temperature rise in its highest mode when lit for longer periods. If the temperature exceeds 60 °C, the power is automatically reduced. As soon as the temperature drops below 60 °C, the highest output can be used again.

Charging: plug the charging cable into the USB connector of your computer, USB mains adapter or car. Attach the cable to the charging plate on the lamp, it will attach itself with magnets. The indicator light on the cable glows red during charging, and turns green when charging is complete. Charging a fully discharged Fenix ARB-L18-3400 battery takes approximately 4.5 hours.

Charge status indication (only works with original battery): after a short press of the button (the flashlight must be switched off), the LED battery charge indicator in the button is activated. Four lit LEDs mean the battery is over 80% charged, three lit 60-80%, two lit 40-60%, one lit 20-40% and one flashing LED means the battery is less than 20% charged.

Warning:

• Do not disassemble the sealed part in the lamp head yourself, this will breach the warranty.
• If the protective rubber rings appear damaged after prolonged use, replace them. The rings also need to be lubricated to prevent erosion of the rubber. By following these rules, the luminaire will be properly protected against water.
• If the lamp flickers or does not light up, it may be due to one of the following reasons:
  • The battery is dead, charge it.
  • The contacts inside the light are dirty - clean them with a cotton swab dipped in alcohol.

Warranty:

Warranty five years on the lamp, two years on the battery.