Gear Aid Aquasure + FD 2x7g

Product description

Water-based adhesive for bonding seams.

Use: Water-based urethane adhesive, suitable for bonding seams on synthetic fabrics and laminates with a membrane structure. The adhesive hardens into a transparent, flexible, durable layer with a matt finish. You can wash and dry in the dryer, the glue is stable even in freezing environments. Procedure: clean and dry the repaired area thoroughly, remove any residues of the old glue. Shake the container, remove the inner foil under the lid. Pull the brush out by pulling the lid. Apply a thin, even layer to the coated side of the bonded fabric (or the inside of the product) by applying pressure to the container. Allow to dry completely (2 hours at room temperature, longer at lower temperatures) and test the adhesive for curing before using or packing.

Note: Before application, test the colour change of the material on a small area.

Cleaning and storage: after use, immediately close the lid and rinse the brush thoroughly with soap and water. Loosen the hardened bristles with lacquer thinner. Store in a dry, cool place. Safety instructions:S2 - Keep out of reach of children. S24/25 Avoid contact with skin and eyes.

Weight: 2x7g