Colltex Hotmelt Foil 110 mm x 4 m

Product description

Adhesive Colltex Hotmelt Foil 110 mm x 4 m is the best way to restore the adhesive layer, as it achieves the effectiveness of the original adhesive. We recommend applying the adhesive to the cleaned fabric surface (after removing the bad adhesive with a heat gun + spatula or an old iron). We recommend using a wooden board wider and longer than the strip, attach the strip to the board, back it with paper and clean it. Replace the paper, stick the foil on the cleaned fabric as adhesive tape and iron for a moderately long time with a clean iron - the temperature is only about 250°C.
The transfer paper may brown slightly. Allow the strips to cool thoroughly (several hours) before removing the transfer paper.

Due to the need for tools and electricity, we recommend that you carry out this renovation at home or at a ski service. We recommend using the adhesive only on colltex/Contour products.

Parameters

Video

Question on product

Bargain packages