Fenix E12 V2.0

Product description

New generation of the popular pocket flashlight Fenix E12 V2.0 with one AA pencil battery. The powerful LED MATCH CA18 provides a luminous flux of up to 160 lumens (ANSI). Thanks to its compact size and weight of only 27.3 grams, the flashlight is suitable for everyday carry (EDC). A unique innovation is a special collimator that produces a wide light cone with a surprising range of 68 meters. The collimator is made with technology used in the automotive industry and its height is only 3 millimeters. Fenix The E12 has three power modes with up to 70 hours of operation. Of course, the high quality of design, durability and waterproof according to IP68. This light is the successor to the first generation model Fenix E12.

All luminaire parameters (luminous flux, battery life, waterproofness, range, and impact resistance) are measured in accordance with ANSI/NEMA FL 1-2009.

Flashlight parameters Fenix E12 V2.0

• Powerful LED MATCH CA18 with lifetime of 50000 hours is used.
• Three power modes: 160 lumens (1 hour) -> 30 lumens (13 hours) -> 5 lumens (70 hours).
• Endurance times are measured with the included alkaline battery.
• Uses one pencil battery (AA type - alkaline, lithium or rechargeable NiMH). These batteries are cheap and widely available.
• Energizer L91 Ultimate Lithium pencil batteries (especially suitable for extreme conditions and expeditions) provide the longest battery life.
• Protection against accidental insertion of the battery in reverse (reverse polarity).
• Special super-thin collimator only 3 mm high, made with technology used in the automotive industry with a range of up to 68 meters (1133 cd).
• Solid steel double-sided buckle for safe and easy carrying of the lamp (removable).
• Dimensions 7,76 cm (length) x 1,9 cm (head diameter) x 1,76 cm (body diameter).
• Weight 27.3 grams (without battery).
• Made of aircraft hardened aluminum type T6, durable surface - Type III hard anodized.
• Shock-resistant to falls from a height of 1 meter.
• Waterproof to IP68 standard (tested underwater at a depth of 2 metres).
• Includes hand loop, alkaline battery and replacement o-ring.
• Optional accessories such as a LockBlocks bike mount, silicone mount or head strap can be purchased.

Using Fenix E12 V2.0

To switch on, press the switch located at the end of the luminaire. The luminaire always switches on to the lowest mode of 5 lumens. With the lamp on, you can change the power modes at any time by pressing the button (cycles through low - medium - high).

Notice

• Do not disassemble the sealed part in the lamp head yourself, this will breach the warranty.
• Use only high-quality pencil batteries to avoid damaging the luminaire, e.g. due to leakage of substances from the battery.
• If the protective rubber rings appear damaged after prolonged use, replace them. The rings also need to be lubricated to prevent erosion of the rubber. By following these rules, the luminaire will be properly protected against water.
• If the lamp flickers or does not light up, it may be due to one of the following reasons:
  • The batteries are almost dead - replace them.
  • The contacts inside the luminaire are clogged - clean them with a cloth dipped in alcohol.
  • The lamp body is loose, tighten it.

Warranty

Warranty five years.