Fenix PD32 V2.0

Product description

The sixth generation of the Fenix PD32 V2.0 flashlight offers up to 1200 lumens (ANSI) and an impressive range of up to 395 meters. The superior range (due to the size of the luminaire) was achieved by using the high-end LED OSRAM KW CSLPM1.TG, which produces a very well focused cone of light. The flashlight can be powered by two disposable CR123A batteries or one high-capacity li-ion 18650 battery. Fenix The PD32 V2.0 features four different light modes that allow you to choose between high power, long lasting(up to 82 hours) and flash mode for attention grabbing and crisis situations. The strobe can be quickly activated from the off state by holding down the tactical button for half a second. The PD32 V2.0 impresses not only with its compact size and great performance, but also with the possibility of attaching a cable switch Fenix AER-02 V2.0. We can therefore recommend it for use in security forces as well as general outdoor and hunting use.

All luminaire parameters (luminous flux, battery life, waterproofness, range, and impact resistance) are measured in accordance with ANSI/NEMA FL 1-2009.

Flashlight parameters Fenix PD32 V2.0:

• The latest version of the powerful OSRAM KW CSLPM1 LED is used.TG with a lifetime of 50000 hours of illumination.
• Four modes in total:
  • lighting modes: 1200 lumens ( 2.66 hours) -> 350 lumens (5.3 hours) -> 30 lumens (82 hours) -> strobe (1200 lumens).
• Smooth parabolic reflector for a light cone with a range of 395 metres (39,000 cd).
• Endurance times are measured with a rechargeable 18650 li-ion battery with a capacity of 3500mAh.
• Digitally controlled for constant brightness.
• Two 3V disposable batteries type CR123A or 1x rechargeable li-ion battery type 18650 can be used for power supply.
• Due to the mechanical protection against reverse polarity, the batteries must have the plus pole exposed. Older batteries Fenix with a flat plus terminal cannot be used.
• The flashlight can be used on a long gun with proper mounting.
• Dimensions 12,94 cm (length) x 2,54 cm (reflector diameter) x 2,36 cm (body diameter).
• Weight 82 grams (without batteries).
• Made of aerospace hardened aluminium, durable surface - Type III HA.
• Shock-resistant to falls from a height of 1 meter.
• The lamp has a memory and will always switch on in the last set mode (not valid for flash modes).
• Elbow threads with increased wear resistance.
• Distinctive surface grooving for better grip, design prevents the lamp from rotating on uneven surfaces.
• Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes).
• Removable steel buckle with black finish.
• Tempered ultra clear glass lens with anti-reflective surface.
• Tactical switch at the end of the light (momentary on/off function).
• The flashlight comes with a wrist lanyard, belt holster and spare o-ring.
• Batteries are not included.
• As an optional accessory, for example, the following can be purchased: cable switch AER-02 V2.0, ALG-05 mount for remote switch, red filter AOF-S+, green filter AOF-S+, blue filter AOF-S+, red transport cone AOT-S, diffuser AOD-S, gun rail mounts ALG-00, ALG-01, swivel bike mount, APL-MT holster, ALP-10S holster, BikeBlock bike helmet mount, BikeBlock bike mount Fenix, or metal magnetic barrel mount or plastic magnetic barrel mount.

Application:

Press the tactical button on the end of the flashlight to turn on, hold the button for immediate activation. The lamp remembers the last selected mode (except strobe). The light modes (except strobe) can be cycled at the touch of a button. To activate the strobe, hold the button fully down for 0.5 seconds (works the same from off). A gentle press returns the luminaire to its original mode. Press the button to switch off the luminaire.

Intelligent overheating protection - as the luminaire reaches a high output of 1200 lumens, it experiences a temperature rise. If the temperature exceeds 60°C, the power is automatically reduced to approx. 500 lumens. As soon as the temperature drops below 60°C, the highest output can be used again.

Low battery warning - the lamp automatically switches to the lowest mode and flashes 3 times every five minutes.

Warning:

• Do not disassemble the sealed part in the lamp head yourself, this will breach the warranty.
• Use only high quality 3V CR123A batteries and 18650 li-ion batteries to avoid damaging the flashlight.
• If the protective rubber rings appear damaged after prolonged use, replace them. The rings also need to be lubricated to prevent erosion of the rubber. By following these rules, the luminaire will be properly protected against water.
• If the lamp is flickering, not switching to higher power modes, or not lighting up, it may be due to one of the following reasons:
  • The batteries are almost dead - replace them.
  • The contacts inside the lamp are clogged - clean them with a cotton swab dipped in alcohol.
  • The head, body or back of the lamp is loose - add lubricant to the sealing rings and tighten the head and end of the lamp firmly.

Warranty:

Warranty five years.